DEMAG ZBA Assembly Instructions Manual page 51

Motor for one line voltage, pole-changing, separate windings
N0
1U 1V 1W 2U
1L1*
1L1 1L2*
2U
2V
1U
1V
1L2
Motor supplied with:
• Brake connected to terminals 1 and 2 of the GP module.
• Jumper connected to terminals 3 and 4 of the GP module.
• GP module connected with the motor winding as in the connection diagram.
038 420 84
Motor for one line voltage, pole-changing, separate windings
Common power supply to motor and brake
N0
1U 1V 1W
1L2* 1L3*
2U
2V 2W N10
1U
A
1V 1W N0
1L1 1L2 1L3
1L1*
Motor supplied with:
• Motor winding connected as in connection diagram (1U and 2U connected to one
terminal).
• Brake connected to terminals 1 and 2 of the GP module.
• SE module connected to terminals 3 and 4 of the GP module.
• SE module connected with the motor winding via intermediate terminal A and terminal
1U 2U.
• GP module connected with the motor winding and intermediate terminal A as in the
connection diagram.
038 421 84
N10
2V 2W
BD1
1L3*
2W N10
~ ~ ~
1W N0
7 6 5
1L3
2U
N10 N0
1U
N10
2U 2V 2W
SE
~ ~ ~
~ ~
BK BK WH GY 7
A 2U
1U
N10 N0
4 3
GP
BD2
GP
+
-
4 3 2 1
BD2 BD1
S
03842084.eps
BD1 BD2
GP
+
-
6 5 4 3 2 1
WH GY
A BD2 BD1
SE
03842184.eps
* = Supply to high-speed winding via external
switch-over.
1U, 1V, 1W for low speed
2U, 2V, 2W for high speed
Common power supply to motor and brake
i
Not suitable for inverter operation.
Switch-off in the DC circuit
• Remove jumper between terminals 3 and 4.
• Connect a contactor between terminals 3
and 4.
Switch-off in the AC circuit
• Jumper between terminals 3 and 4.
• Contactor contacts in the supply line behind
terminal 5.
Motor current switch-off
Jumper between terminals 3 and 4.
* = Supply to high-speed winding via external
switch-over.
1U, 1V, 1W for low speed
2U, 2V, 2W for high speed
Switch-off in the DC circuit
dependent on motor current
i
Not suitable for inverter operation.
51