DEMAG ZBA Assembly Instructions Manual page 4

1 Foreword
1.1 Copyright
1.2 After-sales service
1.3 Liability for defects
1.4 Limitations of liability
4
You have purchased a Demag product. This equipment was manufactured in
accordance with state-of-the-art engineering principles.
These assembly instructions are designed to provide the user with appropriate
instructions for safe and correct work and to facilitate maintenance.
Every individual given the task of transporting, installing, commissioning,
operating, maintaining and repairing our products and their additional equipment
must have read and understood
• the assembly instructions
• the safety regulations
• the safety instructions in the individual chapters and sections.
The assembly instructions must be available to operating personnel at all times in
order to prevent operating errors and to ensure smooth and trouble-free operation
of our products.
These assembly instructions must be treated confidentially. They should only be
used by authorised personnel. They may only be made available to third parties
with the written approval of the manufacturer. All documents are protected within
the sense of copyright law.
No part of this documentation, in whole or in part, may be reproduced, distributed,
used or published in any way without specific prior consent. Infringements are
an offence resulting in obligatory compensatory damages. All industrial rights
reserved.
If you have any questions about our products or need technical information, etc.,
please contact our after-sales service.
The current addresses of the sales offices in Germany and the subsidiaries and
agencies worldwide can be found on our homepage at
www.demagcranes.com/Contact.
These assembly instructions must be read carefully before installing and putting
the product into operation.
We assume no liability for any damage or malfunctions resulting from failure to
comply with the assembly instructions.
Any liability claims for defects must be made by quoting the order number
immediately on detecting the defect.
Any liability claims for defects are void in the event of:
• inappropriate use,
• faulty devices or equipment connected or attached to the product which are not
part of our scope of delivery and services,
• use of non-genuine spare parts and accessories,
• refurbishment or modification of the product unless approved by the
manufacturer in writing.
Wearing parts are not subject to liability for defects.
All technical information, data and instructions for operation contained in these
assembly instructions were up to date on going to print and have been compiled
on the basis of our experience and to the best of our knowledge.
We reserve the right to incorporate technical modifications within the scope of
further development of the products which are the subject of these assembly
instructions.
The information, illustrations and descriptions contained in these assembly
instructions are therefore only intended for information purposes.
The descriptions and illustrations contained in these assembly instructions do
not necessarily correspond to the scope of delivery or any subsequent spare part
delivery, either; the drawing and illustrations are not to scale.
Only documentation belonging to the actual order is valid.