DEMAG ZBA Assembly Instructions Manual page 43

Motor for one line voltage, pole-changing, separate windings
Separate power supply to brake
1U 1V 1W 2U
1L2* 1L3*
1U
2V 2W
2U
A
1V 1W
1L1 1L2 1L3
1L1*
Motor supplied with:
• Motor winding connected as in connection diagram (1U and 2U connected to one
terminal).
• Brake connected to terminals 1 and 2 of the GS module.
• SE module connected to terminals 3 and 4 of the GS module.
• SE module connected with the motor winding via intermediate terminal A and
terminal 1U 2U.
Important: The brake will not function without a separate power supply to
terminals 5, 6 and 7 of the GS module.
038 002 84
Motor for one line voltage, pole-changing, separate windings
Separate power supply to brake
1U 1V 1W
1L2* 1L3*
2U 2V 2W
1U 1V 1W
1L1 1L2 1L3
1L1*
Motor supplied with:
• Jumper parts to connect the motor winding enclosed.
• Brake connected to terminals 1 and 2 of the GS module.
• VE module connected to terminals 1, 3 and 4 of the GS module.
Important: The brake will not function without a separate power supply to
terminals 5, 6 and 7 of the GS module.
038 003 84
BD1
2V 2W
SE
~ ~ ~
~ ~
7 6 5
BK BK WH GY
1U
A
2U
2L3 2L2 2L1
4 3
GS
X1
RD
2U 2V 2W
VE+ GS1 BD1
VE
~ ~
- +
7 6
WH BU RD
2L3 2L2
4 3 X1
GS
BD2
GS
+
-
4 3 2 1
WH GY
BD2 BD1
SE
03800284.eps
BD1 BD2
GS
- +
~
5 3
4 2 1
WH BU
2L1 BD2 X1
VE
03800384.eps
* = Supply to high-speed winding via
external switch-over.
1U, 1V, 1W for low speed
2U, 2V, 2W for high speed
Switch-off in the DC circuit
dependent on motor current
i
Not suitable for inverter operation.
A
= Intermediate terminal
* = Supply to high-speed winding via
external switch-over.
1U, 1V, 1W for low speed
2U, 2V, 2W for high speed
Voltage-dependent switch-off
in the DC circuit
43