DEMAG ZBA Assembly Instructions Manual page 55

Motor for one line voltage, pole-changing, separate windings
Separate DC power supply to brake
N0
1U 1V
1L1*
1L1
2U
1U
Motor supplied with:
• Motor winding connected as in connection diagram (1U and 2U connected to one
terminal)
• Brake connected to Euro terminals.
Important: The brake will not function without a separate DC supply to the brake.
038 428 84
Motor for one line voltage, pole-changing, separate windings
Separate DC power supply to brake, maximum voltage 500 V AC
N0
1U 1V 1W
1L2* 1L3*
2U
2V 2W N10
1U
A
N0
1V 1W
1L1 1L2 1L3
1L1*
Motor supplied with:
• Motor winding connected as in connection diagram (1U and 2U connected to one terminal).
• Brake connected to terminals 1 and 2 of the GE module.
• SE module connected to terminals 3 and 4 of the GE module.
• SE module connected with the motor winding via intermediate terminal A and terminal 1U 2U.
Important: The brake will not function without a separate power supply to terminals 5 and 6 of
the GE module.
038 429 84
N10
2U
1W 2V 2W
1L2* 1L3*
2V 2W N10
1V 1W
N0
1L2 1L3
N10
2U 2V 2W
SE
~ ~
BK BK WH GY
2U
A
1U
4 3
GE
U
SP1 SP2 BD1 BD2
BD1 BD2
SP1 SP2
L+ L-
03842884.eps
BD1 BD2
GE
~ ~ - +
7 6 5 4 3 2 1
WH GY
2L2 2L1 BD2 BD1
SE
03842984.eps
* = Supply to high-speed winding via external
switch-over.
1U, 1V, 1W for low speed
2U, 2V, 2W for high speed
* = Supply to high-speed winding via external
switch-over.
1U, 1V, 1W for low speed
2U, 2V, 2W for high speed
Switch-off in the DC circuit
dependent on motor current
i
Not suitable for inverter operation.
A
= Intermediate terminal
55