Snmp Trap Example - ICP DAS USA tET Series User Manual

Ethernet I/O Modules

4.9.3 SNMP Trap Example

Step 1 Click Tools  Trap Receiver on the menu bar to display the window for receiving the Trap
messages.
Step 2 The types of traps received from the module for alarms are as follows:
1. Cold Start Trap:
After the module's power is completely shut down and then restarted, it will send a Trap
message indicating a "Cold Start".
2. Warm Start Trap:
The Warm Start Trap will be sent when the module restarts without turning off the power.
For example, the reboot command or the watchdog mechanism.
Note: The Cold Start or Warm Start Trap function can be enabled on the
the module if any changed.
ICP DAS CO., LTD. tET/tPET IO Series User Manual, Ver. 2.4, Sep. 2023, P82
SNMP page. Then, reboot