Skilled Persons; Notes For Resellers - LOGICDATA DMIclassic Series Operating Manual

DMICLASSIC FAMILY - OPERATING MANUAL // PAGE 9
CAUTION Risk of minor or moderate injury through crushing
If any Handset Key becomes stuck while the system is in motion, the system may not
stop properly. This may lead to minor or moderate injury through crushing.
• Disconnect the system immediately if any Handset Key becomes stuck

2.8 SKILLED PERSONS

DMIclassic Family handsets may only be installed by Skilled Persons. A Skilled Person is defined as someone
who:
• Has read and understood all documentation relevant to the Handset

2.9 NOTES FOR RESELLERS

Resellers are companies that purchase LOGICDATA products for installation in their own products.
INFO
For reasons of EU conformity and product safety, Resellers should provide end users
with an Operating Manual in their native EU official language
INFO
The Charter of the French Language (La charte de la langue française) or Bill 101 (Loi
101) guarantees the right of the population of Quebec to conduct business and com-
mercial activities in French. The bill applies to all products sold and used in Quebec.
For table systems that will be sold or used in Quebec, Resellers must provide all pro-
ductrelevant texts in French. These include, but are not limited to
• Operating Manuals
• All other product documentation, including datasheets
• Inscriptions on the product (such as labels), including those on product packaging
• Warranty certificates
The French inscription may be accompanied with a translation or translations, but no
inscription in another language may be given greater prominence than that in French.
INFO
Operating Manuals must include all the safety instructions that end users require to
handle the product safely. They must also include an instruction to always keep the
Operating Manual in the immediate vicinity of the product.
INFO
No unauthorized persons (young children, persons under the influence of medications,
etc.) should be allowed to handle the product.
INFO
Resellers must perform a risk assessment on their product that covers residual hazards.
It must include measures to mitigate risk, or reference the product's Operating Manual.