Advertisement
Quick Links
Mounting Instructions for the LogicS
Motor Control
Installation Material
LogicS motor control
Step 1
Position the motor control with attached mounting plate where you want to install it. Mark the
edge of the mounting plate with a pencil.
Mounting plate
4 Wood screws
12 x 3,5
Advertisement
Related Manuals for LOGICDATA LogicS
Summary of Contents for LOGICDATA LogicS
- Page 1 Mounting Instructions for the LogicS Motor Control Installation Material LogicS motor control Mounting plate 4 Wood screws 12 x 3,5 Step 1 Position the motor control with attached mounting plate where you want to install it. Mark the edge of the mounting plate with a pencil.
- Page 2 Mounting Instructions for the LogicS Motor Control Step 2 Detach the mounting plate and install it by means of two wood screws at the marked position (drill the holes beforehand!). Notice the v formation of the mounting plate (see picture).
- Page 3 Mounting Instructions for the LogicS Motor Control Step 4 Mark the drill holes on the frontside with a pencil. Schritt 5 Remove the motor control and screw in the remaining two screws halfway at the marked position (drill holes beforehand!).
- Page 4 Mounting Instructions for the LogicS Motor Control Step 6 (1) Attach the motor control again, (2) slide it onto the mounting plate (pay attention to the correct fit of the mounting plate) and (3) fasten the screws on the frontside.
- Page 5 Mounting Instructions for the LogicS Motor Control Drill Template To speed up the installation you can also use the drill template printed on this page to mark the drill holes.
Need help?
Do you have a question about the LogicS and is the answer not in the manual?
Questions and answers