Maintenance; Cleaning; Troubleshooting; Disposal - LOGICDATA DMIclassic Series Operating Manual

DMICLASSIC FAMILY - OPERATING MANUAL // PAGE 26

9.2 MAINTENANCE

All DMIclassic Family Handsets are maintenance-free for their entire service lifetime.
WARNING Risk of death or serious injury through electric shocks and other hazards
Using a DMIclassic Family Handset alongside unauthorized spare or accessory parts
may lead to death or serious injury through electric shocks and other hazards.
• Only use accessory parts produced or approved by LOGICDATA
• Only use replacement parts produced or approved by LOGICDATA
• Only allow Skilled Persons to perform repairs or install accessory parts
• Contact customer services immediately if the system malfunctions
The use of unauthorized spare or accessory parts may cause system damage. Warranty
claims are void in this scenario.

9.2.1 CLEANING

1. Disconnect the system from the Power Unit.
2. Wait 30 seconds for residual voltage to dissipate.
3. Wipe the surface of the Handset with a dry or slightly damp soft cloth. Never immerse the
Handset in liquid.
4. Wait for the Handset to dry completely.
5. Reconnect the Power Unit.

9.3 TROUBLESHOOTING

A list of common problems and their solutions can be found in the DYNAMIC MOTION System Manual.
Most errors with DMIclassic Family handsets occur when the Control Panel is touched during calibrat-
ion. Such errors can be avoided by waiting for 10 seconds to use the Control Panel after start-up. If your
DMIclassic Family handsets are not functioning, a reset may be required. To reset, proceed as follows:
1. Unplug the DMIclassic Family handset from the Power Unit
2. Wait for 10 seconds.
3. Plug the DMIclassic Family handset back into the Power Unit.
4. Wait for 10 seconds.
▸ The DMIclassic Family handset is ready for operation.

9.4 DISPOSAL

Dispose of all components separately from household waste. Use designated collection points
or disposal companies authorized for this purpose.