Replacing Gateway Notebook Components
Replacing the CMOS battery
74
Tools you need to complete this task:
Flat-blade driver
Phillips #0 screwdriver
Additional materials you may need to complete this task:
X-23-7762 thermal grease
■
Screws removed during this task:
1 chrome 2.5 × 4 mm
(hard drive kit)
4 chrome 2.5 × 4 mm
(cooling assembly)
12 chrome 2.5 × 4 mm (palm rest)
3 chrome 2.5 × 2.5 mm (palm rest)
To replace the CMOS battery:
Complete the steps in
1
Remove the hard drive kit by following the instructions in
2
hard drive kit" on page
Turn the notebook over so the top is facing up.
3
Remove the keyboard cover by following the instructions in
4
the keyboard cover" on page
Remove the keyboard by following the instructions in
5
keyboard" on page
- OR -
4 chrome 2.5 × 2.5 mm
(keyboard)
1 chrome 2.5 × 7 mm
(grounding wire)
"Preparing the notebook" on page
15.
19.
21.
www.gateway.com
Scribe or non-marring tool
3 chrome 2.5 × 4 mm
(LED indicator panel)
6.
"Replacing the
"Replacing
"Replacing the