Replacing The Cmos Battery - Gateway MG1 Service Manual

Replacing the CMOS battery

v
66
CHAPTER 3: Replacing notebook components
Important
Use only CMOS batteries designed for this Gateway notebook.
Tools you need to complete this task:
Flat-blade driver
Phillips #0 screwdriver
Screws removed during this task:
2 black M2×3 (IEEE
802.11 wireless card)
CMOS
battery
bay
To replace the CMOS battery:
1
Complete the steps in
2
Remove the optional IEEE 802.11 wireless card by following the instructions in
"Replacing the IEEE 802.11 wireless card" on page
- OR -
"Preparing the notebook" on page
Scribe or non-marring tool
55.
63.