Gateway 450RGH Service Manual page 90

Replacing Gateway Notebook Components
Legal requirements dictate that a security
screw (or other means) be used to attach
the mini-PCI cover to the chassis in a
manner that restricts end user access.
End users are strictly prohibited from
having access to the wireless card. Due to
manufacturing process changes,
Gateway 450ROG notebooks
manufactured after August 7, 2003 and
all Gateway 450RGH notebooks require a
Torx head security screw to attach the
mini-PCI cover.
Legal requirements dictate the mini-PCI
cover be in place during any and all
operation of the notebook's wireless
86
Reinstall the cooling assembly by following the instructions in
31
the cooling assembly" on page
grease, replace the old grease with new grease.
Reinstall the LED indicator panel by following the instructions in
32
"Replacing the LED indicator panel" on page
Reinstall the keyboard by following the instructions in
33
keyboard" on page
Reinstall the keyboard cover by following the instructions in
34
the keyboard cover" on page
Reinstall the hard drive kit by following the instructions in
35
hard drive kit" on page
If the notebook has IEEE 802.11 wireless networking built in, reinstall the
Caution 36
IEEE 802.11 Mini PCI module by following the instructions in
the IEEE 802.11 Mini PCI card" on page
If the mini PCI screw was covered by a wireless Ethernet label, replace it.
37
© 2006 Gateway, Inc. All rights reserved. Gateway, Gateway Country, the Gateway stylized logo, and the black-and-white spot design are
trademarks or registered trademarks of Gateway, Inc. in the United States and other countries. All other brands and product names are
trademarks or registered trademarks of their respective companies.
Caution
feature.
31. If the cooling assembly uses thermal
21.
19.
15.
12.
www.gateway.com
"Replacing
29.
"Replacing the
"Replacing
"Replacing the
"Replacing