Replacing Gateway Notebook Components
Replacing the IEEE 802.11 Mini PCI card
By law, only approved wireless modules
provided by Gateway or a Gateway
authorized representative, explicitly for
this Gateway notebook, may be installed
in this notebook.
Legal requirements dictate the wireless
cover be in place during any and all
operation of the notebook's wireless
12
Tools you need to complete this task:
Caution
Caution
feature.
To replace the IEEE 802.11 Mini PCI card:
Complete the steps in
1
If the mini PCI screw is covered by a wireless Ethernet label, remove the
2
label.
Use the appropriate screwdriver to loosen the captive screw that secures
3
the mini PCI cover. (The screw cannot be removed.)
Lift the screw side of the cover up, then slide the cover out.
4
Phillips #0 screwdriver
-OR-
Torx T8 screwdriver
"Preparing the notebook" on page
www.gateway.com
6.