Replacing The Cmos Battery - Gateway M675 Service Manual

Replacing the CMOS battery

Tools you need to complete this task:
Screws removed during this task:
1 chrome 2.5 × 2.5 mm
Torx
(mini-PCI card)
8 chrome 2.5 × 4 mm (top, palm rest)
2 chrome 2.5 × 2.5 mm (top, palm rest)
To replace the CMOS battery:
1
Follow the instructions under
2
Disconnect the AC adapter and modem and network cables, then prepare the
notebook by following the instructions in
3
Turn the notebook over so the bottom is facing up.
Flat-blade driver
Phillips #0 screwdriver
2 chrome 2.5 × 2.5 mm
(LCD plug)
www.gateway.com
- OR -
5 chrome 2.5 × 2.5 mm
(keyboard)
6 chrome 2.5 × 2.5 mm
(LCD panel assembly)
"Preventing static electricity discharge" on page
"Preparing the notebook" on page
Scribe or non-marring tool
Torx T8 screwdriver
4 chrome 2.5 × 2.5 mm
(hinge cover)
4 chrome 2.5 × 4 mm
(bottom, palm rest)
5.
6.
51