Replacing Gateway Notebook Components
14
Hold the new card at a 30-degree angle and press it into the empty slot.
8
This card is keyed so it can only be inserted in one direction. If the card
does not fit, make sure that the notch in the card lines up with the tab in
the card slot.
Move the antenna wires out of the way, then press the card down until it
9
clicks into place.
Reattach the black antenna cable to the connector labelled MAIN or M,
10
then reattach the light gray antenna cable to the connector labelled AUX
or A.
Replace the mini PCI cover, then tighten the captive screw.
11
If the mini PCI screw was covered by a wireless Ethernet label, replace the
12
label.
www.gateway.com