Gateway 450RGH Service Manual page 77

www.gateway.com
Legal requirements dictate that a security
screw (or other means) be used to attach
the mini-PCI cover to the chassis in a
manner that restricts end user access.
End users are strictly prohibited from
having access to the wireless card. Due to
manufacturing process changes,
Gateway 450ROG notebooks
manufactured after August 7, 2003 and
all Gateway 450RGH notebooks require a
Torx head security screw to attach the
mini-PCI cover.
Legal requirements dictate the mini-PCI
cover be in place during any and all
operation of the notebook's wireless
Reinstall the palm rest assembly by following the instructions in
20
"Replacing the palm rest assembly" on page
Reinstall the hinge covers by following the instructions in
21
hinge covers" on page
Reinstall the cooling assembly by following the instructions in
22
the cooling assembly" on page
grease, replace the old grease with new grease.
Reinstall the LED indicator panel by following the instructions in
23
"Replacing the LED indicator panel" on page
Reinstall the keyboard by following the instructions in
24
keyboard" on page
Reinstall the keyboard cover by following the instructions in
25
the keyboard cover" on page
If the notebook has IEEE 802.11 wireless networking built in, reinstall the
Caution 26
IEEE 802.11 Mini PCI module by following the instructions in
the IEEE 802.11 Mini PCI card" on page
If the mini PCI screw was covered by a wireless Ethernet label, replace it.
27
Caution
feature.
39.
31. If the cooling assembly uses thermal
21.
19.
12.
Replacing the fingerprint reader
66.
"Replacing the
"Replacing
29.
"Replacing the
"Replacing
"Replacing
73