Gateway 450RGH Service Manual page 46

Replacing Gateway Notebook Components
The connector is fragile. When using a
flat-blade screwdriver to remove the
connector, pry up one side slightly, then
pry up the other side slightly. Continue
alternating from side-to-side until the
connector comes loose.
42
Remove the four hinge screws that secure the LCD panel to the notebook.
7
Use a flat-blade screwdriver or chip puller to carefully unplug the LCD
Caution 8
video cable from the notebook. Make sure you grasp the connector, not
the cable.
Loosen the screw holding the grounding wire, then lift the LCD panel
9
grounding wire to remove the screw.
Screws
LCD panel grounding screw
www.gateway.com
Screws