Gateway 450RGH Service Manual page 60

Replacing Gateway Notebook Components
Legal requirements dictate that a security
screw (or other means) be used to attach
the mini-PCI cover to the chassis in a
manner that restricts end user access.
End users are strictly prohibited from
having access to the wireless card. Due to
manufacturing process changes,
Gateway 450ROG notebooks
manufactured after August 7, 2003 and
all Gateway 450RGH notebooks require a
Torx head security screw to attach the
mini-PCI cover.
Legal requirements dictate the mini-PCI
cover be in place during any and all
operation of the notebook's wireless
56
Starting in the upper-left corner, press the LCD panel front and back
17
together. Press the two halves together in several places until they click
in place. You should find no loose spots or spots where the two halves do
not meet.
Replace the six LCD panel assembly screws.
18
Replace the six rubber inserts.
19
Reinstall the LCD panel assembly by following the instructions in
20
"Replacing the LCD panel assembly" on page
Reinstall the hinge covers by following the instructions in
21
hinge covers" on page
Close the keyboard compartment by following the instructions in
22
"Replacing the keyboard" on page
Reinstall the keyboard cover by following the instructions in
23
the keyboard cover" on page
If the notebook has IEEE 802.11 wireless networking built in, reinstall the
Caution 24
IEEE 802.11 Mini PCI module by following the instructions in
the IEEE 802.11 Mini PCI card" on page
If the mini PCI screw was covered by a wireless Ethernet label, replace it.
25
Caution
feature.
www.gateway.com
39.
21.
19.
12.
41.
"Replacing the
"Replacing
"Replacing