Table of Contents
Advertisement
Back
Servicing
General
The Quattro-OBL pedestal is robustly made to high engineering standards and little attention is
required to maintain serviceability save regular cleaning. Attention to the following points will en-
sure a long and useful service life with minimum need for repair.
Routine maintenance
The Quattro-OBL pedestal requires no routine maintenance other than regular cleaning.
During normal use, check the steering alignment, the effectiveness of the on-shot clamp and
check for radial or side play in the moving column.
If the steering is misaligned, re-align the wheels (see Wheel alignment).
Refer to the appropriate section in the Maintenance Manual if the on-shot clamp is ineffective, ex-
cessive radial or side play is apparent in the moving column, or any other defect is apparent.
Adjustments and repairs should be carried out only by a competent person.
Cleaning
During studio use, the only cleaning required should be a regular wipe over with a lint-free cloth.
Dirt accumulated during storage or periods of disuse may be removed with a semi-stiff brush. Par-
ticular attention should be paid to the flats on the column, the drain holes
(13.1)
in the trim weight
stowage
(13)
and to the wheels.
(13)
(13.1)
Trim weight stowage
20
Advertisement
Table of Contents
