2.3.3
Arm Mounting
PPC-306 can be mounted on a VESA-compliant arm mount with a 100 mm (3.93 in)
interface pad. To affix the panel PC to an arm mount, follow the steps below.
1.
Refer to the installation instructions for the mounting arm to correctly mount the
arm onto the surface of the base.
2.
Align the retention screw holes on the mounting arm interface with VESA holes
on the panel PC, and secure the panel PC with the four M4 retention screws.
Warning! Ensure that the thread depth of the screws on the rear panel does not
exceed 4 mm (0.15 in).
2.3.4
Stand Mount
Before assembling the stand mount, check that the product was shipped with the fol-
lowing items:
Figure 2.18 Arm Mount for the Panel PC
17
PPC-306 EHL User Manual