4.
Assemble the rear cover, and install the antenna.
2.2.3
System Power on
A 2-pin power connector is included in the accessory box. Connect the power con-
nector to 12-30V
receptor. The DC power source shall comply with ES1 requirements, and the output
rating is 12-30V
be evaluated according to IEC/UL 60950-1 and/or IEC/UL 62368-1.
The terminal block is suitable for 16 AWG min., with a torque value 4.5 lb-in min. Use
copper conductors only. It must be installed by a trained and skilled person.
PPC-306 EHL User Manual
Figure 2.9 Assemble the Wi-Fi Antenna
power lines and plug the power cables into the system power
DC
, 8-4 A, with a minimum operating temperature of 50 °C. It has to
DC
12