Table of Contents
Advertisement
1.7
Mounting Type
1.7.1
VESA mounting
1.
Please ensure VESA equipment dimension as 100 x 100 mm.
2.
Take screws from the accessory box.
3.
Insert the screws into every screw holes and fasten them. These screws will
push the VESA mounting and fix the unit.
1.7.2
Foot system mounting
1.
Please ensure that the accessory module which is equipped with four parts.
a). The first part is the main structure and is in the shape of a triangle. The pur-
pose of this main structure is for connecting between the front panel and the
foot system in order to fulfill the various applications in different production
lines.
b). And there are two circle covers. One is like a pie and another one is like a
doughnut. Both of them are very slim but rugged. The diameter of the circle
in the upper and lower side of the triangle are exactly the same. Therefore,
the two circle covers can be exchanged based on different applications for
the arm or foot system.
c). The 4th part is the long-trapezoid piece that is used to cover the triangle to
make it waterproof for plugging the cable in to the rear of the IO ports of the
computer.
2.
Assemble the accessory module and a metal tube which customer prepare by
themselves.
3.
And then, put IPPC-5211WS on the accessory module and insert the screws
into every screw holes and fasten them. These screws will push the accessory
and fix the unit.
1.7.3
Arm system mounting
1.
Please ensure that the accessory module which is equipped with four parts.
a). The first part is the main structure and is in the shape of a triangle. The pur-
pose of this main structure is for connecting between the front panel and the
arm system in order to fulfill the various applications in different production
lines.
b). And there are two circle covers. One is like a pie and another one is like a
doughnut. Both of them are very slim but rugged. The diameter of the circle
in the upper and lower side of the triangle are exactly the same. Therefore,
the two circle covers can be exchanged based on different applications for
the arm or foot system.
c). The 4th part is the long-trapezoid piece that is used to cover the triangle to
make it waterproof for plugging the cable in to the rear of the IO ports of the
computer.
2.
Assemble the accessory module and a metal tube which customer prepare by
themselves.
3.
And then, put IPPC-5211WS on the accessory module and insert the screws
into every screw holes and fasten them. These screws will push the accessory
and fix the unit.
5
IPPC-5211WS Series User Manual
Advertisement
Table of Contents
