2.2.5
System Power On
A 2-pin power connector is included in the accessory box. Connect the power con-
nector to 12-30 V
power lines and plug the power lines into the system power
DC
receptor. The DC power source should comply with ES1 requirements. The output
rating is 12-30 Vdc, 8-4 A, with a maximum operating temperature of 50 °C. It has
been evaluated according to IEC/UL 60950-1 and/or IEC/UL 62368-1.
Figure 2.17 Terminal Block
The terminal block is suitable for 16 AWG min. torque value of 4.5 lb-in min. Use cop-
per conductors only. It must be installed by a skilled person.
17
PPC-315W/318W/321W/324W-TGL User Manual