Laguna Tools SmartShop Maker Owner's Manual page 62

Error Code
GOTO label must be integer
ASIN()/ACOS() operand must
between -1.0 and 1.0
SQRT() operand should not
be negative
L address should be integer
O address should be integer
M address should be integer
Spindle speed, S, should be
integer
Tool length number, H,
should be integer
Tool radius number, D,
should be integer
Tool selection number, T,
should be integer
Sub-program number, P,
should be integer
62
SmartShop|Maker Owner's Manual
Potential Issue(s)
Program error
Programming error
Programming error
Programming error
Programming error
Programming error
Programming error
Programming error
Programming error
Programming error
Programming error
Resolution(s)
Check the machining program
and input integer to GOTO label.
Check the machining program.
Check the program; enter a
positive value in SQRT operand.
Check the program and L
address in integer.
Check the program and use O
address in integer.
Check the program and use M
address in integer.
Check the program and use the
speed S of spindle in integer.
Please check the program and
use tool length number H in
integer.
Please check the program and
use the tool radius number D in
integer.
Please check the program and
use the tool number T in integer.
Please check the program and
use the sub-program number P
in integer.