Laguna Tools SmartShop Maker Owner's Manual page 45

Error Code
NC Vile name is different with
backup name, re-calibrate
before machining
Use last known data, re-
calibrate before machining
Machine data rebuild, re-
calibrate before machining
Power break in machining, re-
calibrate before machining
Machine data file write fail, re-
calibrate before machining
SmartShop|Maker Owner's Manual
Potential Issue(s)
1. The system drove that writing
registry.dat and registry.mir are
written unsuccessfully leads to
two (2) file names inconsistent.
2. Install or replace registry .dat
file.
3. Rename file name when
downloading file.
CF card is damaged, so
registry.dat and regisrty.mir files
are also damaged.
1. Replace CF card.
2. Format CF card.
Discontinue power in machining
process.
1. CF card is damaged.
2. Registry.dat or registry.mir files
are set read-only.
3. System file cannot handle
system resource, lead to
writing file unsuccessfully.
Resolution(s)
1. Scan CF card disk.
2. Reselect machining file
name.
3. Check whether machining
date setting is correct.
4. Reboot.
1. Scan CF card disk.
2. Try setting again or check
whether machining data
setting is correct.
3. Reboot.
1. Reset machining data.
2. Reboot.
1. Scan CF card disk.
2. Check whether machining
data setting is correct.
3. Reboot.
1. Scan CF card.
2. Check whether machining
setting is correct.
3. Reboot.
45