Laguna Tools SmartShop Maker Owner's Manual page 59

Error Code
Macro call too deep
Modal macro call too deep
Subprogram call too deep
Too many modal macro
canel, G67
G65,G66 must be the last
one in G code list
Absent program number
Too many M code
Illegal variable access
Label not found
Line number not found
SmartShop|Maker Owner's Manual
Potential Issue(s)
Programming error
Programming error
Programming error
Programming error
Programming error
Programming error
Programming error
Programming error
Programming error
Programming error
Resolution(s)
Check machining program to
ensure that G65 calls MACRO
subprogram that has less than
twelve (12) layers.
Check machining program to
ensure that G66 calls MACRO
subprogram that has less than
four (4) layers.
Check machining program to
ensure that M98 calls
subprogram that has less than
sixteen (16) layers.
Check program to ensure that
G66 and G67 are used in pairs.
Please check the machining
program.
Please check the machining
program to ensure the use of
G65 and G66.
Please check the machining
program to ensure that there are
equal or less than 3 M codes in
a single block.
Please check the machining
program.
Enter the correct MDI line
number.
59