Diagnostic Messages On Lcd - Emerson Rosemount 8600D Series Reference Manual

Reference Manual
00809-0100-4860, Rev BC
Figure 5-4. Noisy Signals
3.0 V
Figure 5-5. Improper Sizing/Filtering
0
3.0 V
0
5.4

Diagnostic messages on LCD

In addition to the output, the LCD indicator displays diagnostic messages for troubleshooting
the flowmeter. These messages are as follows:
SELFTEST
The flowmeter is in the process of performing an electronics self test.
FAULT_ROM
The flowmeter electronics has undergone a EPROM checksum fault. Contact your Field Service
Center.
Troubleshooting
0
0
Get other manuals https://www.bkmanuals.com
Section 5: Troubleshooting
Vortex Signal
(TP1)
Trigger
Level
Shedding
Frequency
Output
Trigger
Level
Vortex Signal
(TP1)
Shedding
Frequency
Output
January 2013
73