Table of Contents
Advertisement
RAA306012 RSSK User's Manual
Chapter 6. Renesas Motor Workbench
The board is equipped with an evaluation version of the Renesas Motor Workbench (RMWB) and ICS host
function. The sample program for this IC uses RMBK. Install RMWB on a Windows PC, and connect the PC
and Evaluation Board with a USB micro-B cable, monitor and change global variables from the PC, and
display graphs.
When using RMWB (ICS), it is necessary to set a jumper pin in ICS_SEL.
ICS uses the UART function. Therefore, UART cannot be used as a general-purpose function at the same
time.
This tool and library are sample and Renesas does not provide technical support. In addition, Renesas cannot
be held responsible for any problems such as damage caused by incorporating or using this tool.
For instructions on using the tool, refer to the user's manual of the Motor Control Development Support Tool
Renesas Motor Workbench.
Reference:
Renesas Motor Workbench URL: https://www.renesas.com/us/en/software-tool/renesas-motor-workbench.
If you wish to use RMWB in your user system, please consider purchasing the ICS / ICS ++ product version.
The product version of ICS/ICS++ is sold by Desktop Lab Co., Ltd.
Reference:
Desktop Lab Co., Ltd. URL:
R12UZ0128EJ0100
Rev.1.00
Nov 1, 2023
http://www.desktoplab.co.jp/download.html
Figure 6-1 Connect with PC (RMWB (ICS) Function)
to PC for RMWB (ICS ) function
ICS_SEL
6.Renesas Motor Workbench
7
1
8
2
Page 74 of 76
Advertisement
Table of Contents
