Chapter 3. Usage - Renesas RAA306012 User Manual

RAA306012 RSSK User's Manual
The RAA306012 RSSK is available for evaluation with some kinds of motor control methods by using the
Evaluation Board, Control Board, and Motor attached in this evaluation kit.
This evaluation kit includes the following two types of Control Boards, and each Control Board can be
evaluated for two different control methods with sample programs.
This chapter describes the control specifications, board settings, and operation guide when using the sample
programs.
For details of the sample programs, please refer to the application notes and source files of each sample
program.
・RX13T Control Board
- Sensorless vector control (Application Note: R18AN0060EJ (Factory default FW))
- Sensorless 120-degree conducting control (Application Note: R18AN0058EJ)
・RL78/G1F Control Board
- Sensorless 120-degree conducting control (Application Note: R18AN0062EJ)
- 120-degree conducting control using Hall sensors (Application Note: R18AN0062EJ (Factory default FW))
The sample programs for RAA306012 RSSK are available as either RAJ306101 or RAJ306102 sample
programs.
When using the RX13T Control Board, use RAJ306101 sample programs, and when using the RL78/G1F
Control Board, use RAJ306102 sample programs.
For changing the sample program, refer to Chapter 5 Emulator Function and the manual for each
development environment.
The appropriate board settings are required for each control method. Refer to the corresponding section for
the board settings.
Using 0[Ω] resistors or short-circuiting with solder is required to change the board settings.
Note.1: This product does not include replacement 0[Ω] resistors. 0[Ω] resistors should be prepared by the user or short-circuited by
soldering.
R12UZ0128EJ0100 Rev.1.00
Nov 1, 2023

Chapter 3. Usage

3. Usage
Note.1
Page 23 of 76