About Connecting To Aws Iot; Verifying The Application Project Using Aws Dashboard And Renesas Dashboard - Renesas CK-RX65N Getting Started Manual

CK-RX65N
SIM activation, Creating the trial account and using Dashboard with RYZ014A or Ethernet

4.6 About Connecting to AWS IoT

This section describes the steps to be followed to connect the device to the AWS IoT.
Note: For Ethernet Applications, firewalls in the network may prevent connectivity to AWS IoT. Configure
the network to allow access to the MQTT Port 8883.
4.7 Verifying the Application Project using AWS Dashboard and Renesas
Dashboard
This section describes the steps on how to verify this application example's functions.
Note: Wait for the board to get the IP address from the service provider upon successful cellular initialization,
and the board to resolve the DNS lookup for the endpoint. After the successful MQTT connection message
on the Console "Successful MQTT Connection to the end point", the device is ready for Publishing and
Subscription of Messages.
Note: This Application involves AWS MQTT IOT Core, user has an option to use the AWS IOT Dashboard
for the Validation purpose, in addition to using the Renesas GUI based Dashboard for customized view of all
the Sensor Data.
For the verification purposes, the user can use the AWS IOT core Dashboard for configuring and controlling
the Subscription and Publishing of the Topics as described in the following sections.
On the AWS cloud Dashboard side, go to IoT Core and select Test, then choose MQTT test client.
Subscribe to a topic listed below one at a time. The sample snapshot of subscribing to the topics are shown
below.
Note: The messages shown under are case sensitive; users need to take care of this entering the publish
or subscribe messages.
Only enter one message at a time. Copy the message 'as-is' between the quotes and do not include
any extra spaces.
"aws/topic/iaq_sensor_data"
"aws/topic/oaq_sensor_data"
"aws/topic/hs3001_sensor_data"
"aws/topic/icm_sensor_data"
"aws/topic/icp_sensor_data"
"aws/topic/ob1203_sensor_data"
Note: After the subscription to the Topics, the Dashboard is ready to receive the messages being published
from the device.
R01QS0064EJ0130 Rev.1.30
June.02.23
Application for AWS - Getting Started Guide
Page 49 of 56