Connect The Motor And The Board - Renesas MCK-RA6T3 Quick Start Manual

Renesas RA Family MCK-RA6T3 Quick Start Guide
4.1.2

Connect the motor and the board

Connect the supplied inverter board, CPU board and motor following Figure 4-3. Also, turn off SW1 on the
inverter board and set VR1 to around the center. The motor is equipped with a Hall sensor signal cable, but
since the Hall sensor signal is not used for quick start operation, it does not need to be connected.
Figure 4-3 Hardware configuration
R12QS0061EJ0100 Rev.1.00 Page 8 of 17
May 23, 2023