Configuration Switch B - Allen-Bradley 4100-AEC Installation And Setup Manual

Configuration Switch B

Transducer Turns, Data Format, & Operation Mode
IMPORTANT
ATTENTION
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Transducer Turns, Data Format, & Operation Mode
Switch Setting Turns
0 Single
1
2 Single
3
4 Single
5
6 Single
7
8 Multi
9
A Multi
B
C Multi
D
E Multi
F
All Allen-Bradley 842A Encoders set for grey output
must have Configuration Switch B set to 0. All
Allen-Bradley 842A Encoders set for binary output
must have Configuration Switch B set to 4.
The Compact and 1394 motion controllers must use the
LOCKED mode of operation.
!
Data Code Operation Mode
Grey Locked
Reserved for future use
Grey Free Run
Reserved for future use
Binary Locked
Reserved for future use
Binary Free Run
Reserved for future use
Grey Locked
Reserved for future use
Grey Free Run
Reserved for future use
Binary Locked
Reserved for future use
Binary Free Run
Reserved for future use
Publication 4100-5.2 - March 2000
Setup 31