Table of Contents
Advertisement
26
Installation & Hook-Up
Publication 4100-5.2 - March 2000
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Control Connector Pin Functions
Pin Number
1
2
3
4
5
6
7
8
The following table displays the connector pin numbering scheme, as
seen with the AEC mounted in its normal position.
Control Connector Pin Numbering
Analog Servo Command Pass Through (For Compact Only)
There is one analog command pass through signal pair (Reference +
and Reference -) per axis. The 4100-RCS3T encoder cable between the
AEC and the Compact (see Connecting the AEC to a Compact section
of this chapter) passes the analog command signal from the Compact,
through the AEC, and out to the servo amplifier, if connected.
Control
Pin Function
Shield
Fault N/C Relay Contact
Fault N/O Relay Contact
Reference -
Shield
N/C Relay Common Contact
N/O Relay Common Contact
Reference +
A
B
8
4
7
3
6
2
5
1
Advertisement
Table of Contents
