Table of Contents
Advertisement
Plug A
Reference +
8
7
6
5
Shield
Plug B
Reference -
4
3
2
1
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Figure 11 Wiring diagram for connecting a Servo Amplifier
to the Control Connector
Anchor the cable so that no more than 2 feet of cable is
IMPORTANT
left unsupported. The excessive weight of an unanchored
cable could pull the plug out of the connector.
Power Supply Connector
The power supply connector is used to connect power to the AEC.
There is one power input connector for the AEC. The input power is
used to operate the AEC and attached transducers.
The AEC operates within the voltage range of 18-36V DC. The power
source must be able to supply 21W of power continuously.
Installation & Hook-Up 27
To Servo Amplifier
Publication 4100-5.2 - March 2000
Advertisement
Table of Contents
