Table of Contents
Advertisement
ATTENTION
Contents of this Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
An incorrectly applied or installed product can result
in component damage or a reduction in product life.
Wiring or application errors, such as undersizing or
!
inadequate DC supply, or excessive ambient
temperatures can result in a malfunction.
The AEC contains ESD (Electrostatic Discharge)
sensitive parts and assemblies. Static control
precautions are required when installing, testing,
servicing, or repairing this assembly. Component
damage can result if ESD control procedures are not
followed. If you are not familiar with static control
procedures, refer to Allen-Bradley publication
8000-4.5.2, Guarding Against Electrostatic Damage or
any other applicable ESD Protection Handbook.
Chapter
Title
Preface
1
Overview
2
Installation
3
Set-Up
4
Operation
5
Fault Indication &
Control Status
Appendix
Specifications
A
Appendix
Strobe Position
B
Contents
Describes the purpose, background, and scope
of this manual. Also specifies the audience for
whom this manual is intended.
Provides a general description of the AEC, its
features and mechanical specifications.
Provides the steps needed to successfully
mount and wire the AEC to an SSI device and
the S Class Compact Motion Controller or the
1394 GMC system.
Provides the guidelines for setting up and
configuring the AEC.
Provides information on Absolute and
Incremental Position..
Provides information on fault and status
indicators and types of faults.
Provides physical, electrical, environmental,
and functional specifications for the AEC.
Contains additional information about setting
the strobe for those users connecting their
AEC to a controller other than the S Class
Compact Motion Controller or the 1394 GMC
system.
Publication 4100-5.2 - March 2000
Preface
3
Advertisement
Table of Contents
