Table of Contents
Advertisement
Preface
2
Safety Precautions
Publication 4100-5.2 - March 2000
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The following general precautions apply to the AEC:
Electric shock can kill. Make sure the AEC is safely
ATTENTION
installed in accordance with the Installation and
Set-up chapters of this manual. Avoid contact with
!
electrical wires and cabling while power is on.
Only trained service personnel should open the
electrical cabinet.
This product contains stored energy devices. To
avoid hazard of electrical shock, verify that all
voltage on the capacitors has been discharged
before attempting to service, repair, or remove this
unit. You should only attempt the procedures in
this manual if you are qualified to do so and
familiar with solid-state control equipment and the
safety procedures in publication NFPA 70E and
BS-EN60204.
The system integrator is responsible for local safety
and electrical codes.
Electric shock can kill. Make sure the AEC is safely
ATTENTION
installed in accordance with the Installation and
Set-up chapters of this manual. Avoid contact with
!
electrical wires and cabling while power is on. Only
trained service personnel should open the electrical
cabinet.
This product contains stored energy devices. To
avoid hazard of electrical shock, verify that all
voltage on the capacitors has been discharged before
attempting to service, repair, or remove this unit. You
should only attempt the procedures in this manual if
you are qualified to do so and familiar with
solid-state control equipment and the safety
procedures in publication NFPA 70E and
BS-EN60204.
The system integrator is responsible for local safety
and electrical codes.
Advertisement
Table of Contents
