Table of Contents
Advertisement
Figure 2 Mounting and Grounding Diagram
Internal Star Washers
Scrape paint off panel to insure
electrical connection between
chassis and grounded metal plate.
Mount the AEC next to a 1394 GMC system or an S Class Compact
motion controller on a metal enclosure panel using two 1/4 -20 or M6
bolts. Refer to the Mechanical Specifications in the Overview chapter
of this manual for mounting dimensions. Figures 2.2 and 2.3 in this
chapter show where to mount the AEC.
ATTENTION
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
#10 AWG to
Ground Bus
Ground
Lug
To avoid a shock hazard, remove all power to the
system panel before mounting the AEC.
The 1394 contains stored energy devices. To avoid the
!
hazard of electrical shock, verify that all voltages are
zero (0.00) before proceeding.
Installation & Hook-Up 13
AEC Mounting Tab
Size 1/4 - 20 or M6
Hardware
Tapped Hole
(Minimum of 3 Threads)
Metal Panel
(Must be connected to
earth ground.)
Publication 4100-5.2 - March 2000
Advertisement
Table of Contents
