Table of Contents
Advertisement
Connecting the AEC to the 1756-MO2AE
To connect the AEC to the 1756-MO2AE, use the pre-made encoder
cable (4100-CCS15F) for each axis. This 15 foot cable connects the
Axis 0 Encoder or Axis 1 Encoder connector on the AEC to the
1756-MO2AE. The 4100-CCS15F is a 15 foot cable with a 12-pin plug
on one end and the flying leads on the other end.
IMPORTANT
To connect the 4100-CCS15F Encoder cable:
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
See Application Note, publication number 4100-2.7 for
TIP
more detailed information regarding using the AEC with
the 1756-MO2AE.
This cable is NOT polarity sensitive.
1. Insert the end with the 12-pin plug to either the Axis 0 Encoder
or Axis 1 Encoder connector on the AEC.
2. Connect the flying leads to the appropriate pin locations on the
1756-MO2AE using the pin locations as shown in the following
diagram.
1756-MO2AE Pins for Connecting AEC
Pin Number
1
3
11
25
27
29
31
33
35
Installation & Hook-Up 19
Pin Value
Wire Color
V REF+
Red
V REF-
Black
Chassis
Black
A+
White
A-
Black
B+
Green
B-
Black
Z+
Blue
Z-
Black
Publication 4100-5.2 - March 2000
Advertisement
Table of Contents
