Digital Watchdog MEGApix DWC-MHS5W37T User Manual page 59

Set up - Security Set up
Certificates Configuration
3
5
7
9
11
13
14
Detail for Creating a Self-Install Certification.
Certificate Name: enter a name or label to identify the certificate. Do not use spaces.
1
Expires on: set an expiration date for the certificate. This setting will determine how long the certificate will
2
remain valid before it will need to be replaced.
Country: enter the country where the camera is installed.
3
State or Province: enter the state or province where the camera is installed.
4
Locality: enter the name of the city where the camera is installed.
5
Organization: enter the company name.
6
Organization unit: enter a company department.
7
Common Name: by default, the IP address of the camera will be used. If a DNS server will be used when
8
connecting instead, you can enter the common identifier here. For example, the domain of "*digital-watchdog.
com" could be used when connecting through HTTPS if it was registered on DW's server.
RSA: this represents the level of security for the public-key cryptography algorithm. By default, the setting is
9
set to 4096-bit encryption and cannot be changed.
SHA: this represents the level of security for the Secure Hash Algorithm (SHA) that is used for hashing data
10
and certificate files. By default, the SHA is set to 256-bit encryption and cannot be changed.
Alternative Hostname 1: enter the alternate domain or host for this certificate. For example, ".digital-watchdog.
11
local" can be used if the domain has been registered on a DNS server.
Alternative Hostname 2: enter an alternate domain or host for this certificate.
12
Alternative IP: by default, the Alternative IP is set to the IP Address of the camera. You can enter the Public IP
13
Address of the network here to use an HTTPS connection when connecting over WAN.
OK - Request installing a CA certificate.
14
Cancel - Cancel installing the CA certificate and go back to the certificate configuration.
15
1
2
59
4
6
8
10
12
15