Digital Watchdog MEGApix DWC-MHS5W37T User Manual page 39

Set up - Network Set up
HTTP Action
1
2
3
4
General Setting - Enable or disable the camera to send an HTTP action when an event occurs. When enabled,
1
the camera can notify a monitoring software using HTTP protocol.
Account information -
2
Description: Enter a short description for the action.
HTTP Action Server: Enter the HTTP address of the receiving server. This is the server that will receive the
HTTP action notification from the camera.
PORT: Enter the port number for the receiving server.
User ID: Enter the user ID information for the receiving server.
Password: Enter the password information for the receiving server.
Message - Enter the default message that will be included with the alert.
3
Click 'Apply' to make the above setting effective.
4
39