Digital Watchdog MEGApix DWC-MHS5W37T User Manual page 15

Web Viewer Screen -
Basic Screen
2
3
4
5
Web Viewer is optimized for Microsoft Edge and Google Chrome.
Live video display - This is the region for live video streaming from the camera.
1
Set up popup button - Open the setup page to set up details of the IP camera like Video, Network,
2
Events, System etc. See the section 'Setup.'
Live Buffering - Live video can be turned on and off. You can get a faster response when turning off the live
3
video than the network band's camera setting.
Arrow buttons - Using the Pan and Tilt of the camera, can move in 8 directions.
4
This function is only supported by PTZ cameras.
Zoom, Iris and Focus buttons - Adjust the camera's focus based on the current view and conditions.
5
This function is only supported by PTZ cameras.
PTZ function - Control and activate the camera's home position or run any set presets, tours or actions.
6
This function is supported on PTZ cameras only.
Audio function - Adjust the camera's audio settings. Users can enable or disable audio from the camera, adjust
7
the volume, and enable or disable audio from the monitoring PC to the camera.
This function is available on cameras with audio input and output support.
Alarm input - When an alarm is triggered, the (0) notification will show the alarm is active. This is available on
8
cameras that support relay output.
Relay out - Enable or disable the relay output in the camera. This is available on cameras that support relay
9
output.
Motion - When motion is detected in the camera, the motion icon will turn orange.
10
Camera Time - Shows the date and time established in the camera's settings.
11
Check the Set up > System > Date & Time Setting to display the time.
6 7
15
8
9
1
10
11