Table of Contents
Advertisement
2) While keeping the back edge of the cowl
lush with the marks, align the front of the
cowl with the crankshat of the engine. he
front of the cowl should be positioned so the
crankshat is in nearly the middle of the cowl
opening. Use the spinner backplate as a
guide. Hold the cowl irmly in place using
pieces of masking tape.
Machine screw M3x10mm.
3) Install the muler and muler extension
onto the engine and make the cutout in the
cowl for muler clearance. Connect the fuel
and pressure lines to the carburetor, muler
and fuel iller valve. Secure the cowl to fuse-
lage using the M3x10mm screws.
ELECTRIC POWER CONVERSION.
Locate the items neccessary to install
the electric power conversion included
with your model.
Recommend the items necessary to in
stall the electric power conversion parts
included with your model.
- Motor: 160 - 2700 Watts
- Propeller: 18x8 ~ 20x10
- ESC: 70A - 100A
- 9-10S Lipo
Attach the electric motor box to the
irewall suitable with the cross lines
drawn on the electric motor box and ire-
wall. Using epoxy and balsa stick to se-
cure the motor box to the irewall. Please
see pictures below.
15
Advertisement
Table of Contents
