Replacing The Fan (R8) - ABB ACS800-04 Hardware Manual
Drive modules
Hide thumbs
Also See for ACS800-04:
- Hardware manual (118 pages) ,
- Cabinet installation and operating instruction (162 pages) ,
- Installation manual (52 pages)
Table of Contents
Advertisement
94 Maintenance
Replacing the fan (R8)
1.
Remove the front cover.
2. Disconnect the fan capacitor and power supply wires.
3. Remove the red fastening screws of the plastic side cover of the fan. Shift the
cover to the right to free its right-hand edge and lift the cover off.
4. Remove the red fastening screws of the fan.
5. Lift the fan out of the cabinet.
6. Install the new fan and fan capacitor in reverse order to the above.
2
3
2
3
4
5
4
Advertisement
Table of Contents
