Leds - ABB ACS800-04 Hardware Manual
Drive modules
Hide thumbs
Also See for ACS800-04:
- Hardware manual (118 pages) ,
- Cabinet installation and operating instruction (162 pages) ,
- Installation manual (52 pages)
Table of Contents
Advertisement
98 Maintenance
LEDs
This table describes LEDs of the drive.
Where
RMIO board
Control panel mounting
platform
AINT board
LED
Red
Drive in fault state
Green
The power supply on the board is OK.
Red
Drive in fault state
Green
The main + 24 V power supply for the control panel
and the RMIO board is OK.
V204 (green)
+5 V voltage of the board is OK.
V309 (red)
Prevention of unexpected start-up (option +Q950)
or Safe torque off (option +Q967) is ON.
V310 (green)
IGBT control signal transmission to the gate driver
control boards is enabled.
When the LED is lit
Advertisement
Table of Contents
