Categorization According To The Plus Code; Contents - ABB ACS800-04 Hardware Manual

18 Introduction to this manual

Categorization according to the plus code

The instructions, technical data and dimensional drawings that concern specific
optional selections are marked with + codes, for example, +E202. The options
included in the drive can be identified from the + codes on the type designation
Operation principle and hardware
label. The + code selections are listed in
description
(page 23).

Contents

A brief description of the chapters in this manual:
Safety instructions
(page 11) give safety instructions for the installation,
commissioning, operation and maintenance of the drive.
Introduction to this manual
introduces this manual.
Operation principle and hardware description
(page 23) describes the drive.
Mechanical installation
(page 33) describes the mechanical installation of the drive
cabinet.
Planning the electrical installation
(page 37) instructs on the motor and cable
selection, protections and cable routing.
Electrical installation
(page 63) shows how to wire the drive.
Motor control and I/O board (RMIO)
(page 75) shows external control connections
and specifications of the motor control and I/O board.
Installation checklist
(page 83) contains a list for checking the mechanical and
electrical installation of the drive.
Start-up and use
(page 85) describes the start-up procedure and use of the drive.
Maintenance
(page 89) contains preventive maintenance instructions.
Technical data
(page 99) contains the technical specifications of the drive, e.g. the
ratings, sizes and technical requirements and provisions for fulfilling the
requirements for CE and other markings.
Resistor braking
(page 131) describes how to select, protect and wire optional brake
choppers and resistors. The chapter also contains technical data.
Non-ABB du/dt filter selection
(page 139) contains guidelines on selecting and
u t
installing a non-ABB d /d filter with the drive.
RDCO-01/02/03/04 DDCS communication option modules
(page 141) contains a
description of the RDCO-0x DDCS communication option modules connections and
the technical specifications of the RDCO-0x modules.