About This Manual; What This Chapter Contains; Target Audience; Common Chapters For Three Products - ABB ACS800-U4 Hardware Manual

About this manual

What this chapter contains

This chapter describes the intended audience and contents of the manual. It
contains a flowchart of steps in checking the delivery, installing and commissioning
the drive. The flowchart refers to chapters/sections in this manual and other
manuals.

Target audience

This manual is intended for people who plan the installation, install, commission, use
and service the drive. Read the manual before working on the drive. The reader is
expected to know the fundamentals of electricity, wiring, electrical components and
electrical schematic symbols.
The manual is written for readers worldwide. Both SI and imperial units are shown.
Special US instructions for installations within the United States that must be
installed per the National Electrical Code and local codes are marked with (US).

Common chapters for three products

Chapters
board (RMIO)
and the ACS800-04/U4.

Categorization according to the frame size

Some instructions, technical data and dimensional drawings which concern only
certain frame sizes are marked with the symbol of the frame size R2, R3... or R8.
The frame size is not marked on the drive designation label. To identify the frame
size of your drive, see the rating tables in chapter

Contents

The chapters of this manual are briefly described below.
Safety instructions
operation and maintenance of the drive.
About this manual
Safety instructions, Electrical installation planning, Motor control and I/O
and Resistor braking
give safety instructions for the installation, commissioning,
introduces this manual.
apply to the ACS800-01/U1, the ACS800-02/U2
Technical data.
About this manual
17