Riso SF Series User Manual page 123

Setting item
[Margin-Plus Rate]
You can change the reduction rate that is applied to the setting of
[Margin+] (A 57).
[Auto 90°Rotation]
When the original and paper have the same size but different
directions, the image is automatically rotated to make a master.
[Clock/Calendar]
You can adjust the internal clock of this machine
[Multi-Up Interval]
When [Multi-Up Print] (A 62) is set to on, if a certain amount of
time has elapsed without the next original being placed, master
making starts automatically. This certain amount of time is referred
to as [Multi-Up Interval].
[Reserve Period]
Even if this machine has been left untouched after the operation
stops, master making of the received original data does not start
until a certain amount of time has elapsed. This certain amount of
time is referred to as a "reserve period".
[Ex. Reserve Period]
You can change the extended time of [Reservation]
[Auto Clear]
You can set a value to be returned to its default setting if this
machine has not been used for a certain amount of time. You can
also change the time before the value is returned to its default set-
ting.
[Auto Sleep]
You can set this machine to go into sleep mode, in which power
consumption can be reduced, if this machine has not been used
for a certain amount of time.
You can reduce the power consumption compared to [Standard]
by setting [Power Consumption (in Sleep)] to [Low], but the follow-
ing limitations occur:
• The RISO console cannot be displayed in sleep mode. (When
[Standard] is set, the console can be displayed in sleep mode.)
• Original data cannot be received in sleep mode. (When [Stan-
dard] is set, data can be received in sleep mode.)
BWhen [Protect] (A
not be set to [OFF]. Also, [Waiting Time] is fixed to [1].
[Auto Power-OFF]
You can set the power so it is turned off if this machine has not
been used for a certain amount of time.
[Power-OFF Schedule]
You can set this machine power to be turned off at the specified
time.
BThe power does not turn off if this machine is being used
or receiving original data when the specified time has
arrived.
(A 145).
(A
135) is set to [ON], [Auto Sleep] can-
Chapter 7 Setting the Operation Conditions
Description
90 to 94 to 99%
OFF, ON
Year, Mnth, Day, Hour, min
15 seconds, 30 seconds
OFF, 15 seconds, 30 seconds, 60 seconds
5 minutes, 10 minutes, 30 minutes
98).
OFF, ON
[Waiting Time]: 1 to 5 to 60 minutes
OFF, ON
[Power Consumption (in Sleep)]: Low, Stan-
dard
*
[Waiting Time]: 1 to 5 to 99 minutes
* The factory default setting depends on the desti-
nations of the model.
OFF, ON
[Waiting Time]: 1 to 99 minutes
OFF, ON
[Hour]: 0 to 23
[min]: 0 to 59
121
7