Riso SF Series User Manual page 149

2 If the master roll is loose, turn the flange on
the right toward the rear and rewind it.
■ If you cannot insert the master roll
Insert the master roll using the following steps.
1 Turn the dial at the edge of the master guide
flap toward the rear and raise the master
guide flap.
2 Align the leading edge of the master roll to
the line indicated by the arrow.
3 Return the master guide flap to its original
position.
2
10
Close the master making unit
cover.
BWhen closing the master making
unit cover, press the cover itself
with your hands from above with-
out holding the lever. Make sure
to close it so that it does not open
when you release your hands.
Master guide flap
1
2
Flange
3
1
Chapter 9 Replacing Consumables
11
Return the master making unit to
its original position.
12
Close the front door.
147
9