86
Chapter 4 Functions for Printing
6
After entering a new name, touch
[OK].
The [Parameter List] screen is displayed.
7
Touch [Close].
The [Special Paper Ctrl] screen is displayed.
BIf the name does not fit in the dis-
play area, the latter part of the name
is displayed as "...".
Erasing the adjustment values
1
Touch [Special Paper Ctrl] in the
[Functions] tab screen.
2
Touch [Entry/Call].
3
Touch [Clear].
4
Touch the button that you want to
erase.
5
Touch [OK] in the confirmation
screen.
The [Parameter List] screen is displayed.
6
Touch [Close].
The [Special Paper Ctrl] screen is displayed.
Adjusting the Position of Paper
Jumping Wings
[Jump Wing Control]
The paper jumping wings are used to eject the
printed paper to the paper receiving tray. Normally,
the position of the paper jumping wings is adjusted
automatically according to the paper size and selec-
tion of the position of the paper-feed setting lever
(A
32).
When you use paper for which the position cannot
be adjusted automatically, turn on [Jump Wing Con-
trol]. The paper jumping wings are moved to a spe-
cial position.
BIf [Jump Wing Control] is not displayed,
special settings are required. For more
information, consult your dealer or
authorized service representative.
BYou can change the default setting in
[Jump Wing Control]
[Admin.].
1
Touch [Jump Wing Control] in the
[Functions] tab screen.
Paper jumping wings
(A
119) under