Erasing The Authentication Setting; Managing The Used Master [Protect] - Riso SF Series User Manual

1
Touch [Reset Counter] in the [User
Management] screen.
To display the [User Management] screen, per-
form steps 1 to 3 in [Recognized by]
2
Touch [OK].

Erasing the authentication setting

To disable the authentication function, erase all of the
authentication settings including the registered admin-
istrator.
BOnce you have erased the authentica-
tion settings, it is not possible to return
to the status before the settings were
erased.
1
Touch [Recognized by] in the
[User Management] screen.
To display the [User Management] screen, per-
form steps 1 to 3 in [Recognized by]
2
Touch [OFF/Delete].
A confirmation screen is displayed.
3
Touch [OK].
All of the user authentication settings are
erased and the authentication function is dis-
abled.
Managing the Used Master
[Protect]
(A 130).
After printing, the master that has been made is still
loaded on the print drum (cylinder) in the print ready
status.
When [Confidential]
that has been made is discarded. Therefore, you
can prevent improper printing of confidential docu-
ments.
However, as the discarded masters are accumu-
lated in the master disposal box, there is a risk that
the box could be removed by a third party with mali-
cious intent.
In order to avoid such a risk, this machine features
the [Protect] function.
BWhen [Protect] is set to [ON], the time that
BWhen [Protect] is set to [ON], you cannot
(A 130).
■ Operation when [Protect] is set to on
• After printing is complete, a confirmation screen that
prompts you to execute [Confidential] is displayed.
[OK]: Touch this button to discard the already made
masters.
[Cancel]: Touch this button if you do not need to dis-
card the master or you want to print further copies.
The confirmation screen is displayed in the following
cases:
– When the [RESET] key is pressed.
– When the time that is set in [Auto Clear]
elapses.
– After restored from sleep mode.
– When the power is turned on.
Chapter 7 Setting the Operation Conditions
(A 99) is turned on, the master
is required for switching to [Auto Sleep]
(A 121) is fixed to one minute.
use [Renew Page] (A 81).
135
7
(A 121)