Riso SF Series User Manual page 121

Setting item
[Jump Wing Control]
You can change the default setting of [Jump Wing Control]
B[Jump Wing Control] is displayed only when the spe-
cial paper has been set in advance. For more infor-
mation, consult your dealer or authorized service
representative.
[Paper Ejection Adj]
You can change the default setting of [Paper Eject Adj]
[Scan Data Folder]
You can change the default setting of [Directory]
scanning mode.
[Quick Master Making]
You can change the default setting of [Quick Master Making]
(A 57).
Description
OFF, ON
(A 86).
[Air Blow]: OFF, ON
[Separation Fan]: OFF, 1, 2, 3, 4
(A 82).
[Suction Fan]: OFF, 1, 2, 3, 4
[Pre-suction Fan]: OFF, ON
1 to 6_FOLDER
(A 111) in the
OFF, ON
Chapter 7 Setting the Operation Conditions
119
7